| Product | Description | Min. CO detection (ppm) |
Max. CO detection (ppm) |
Gases detected | Accuracy |
|---|---|---|---|---|---|
A basic UL 2034 listed CO alarm with an electrochemical sensor, an 85 dB alarm, replaceable batteries and an end-of-life chirp. It has no digital display, which keeps it among the lowest-priced alarms in the table. At 0.70 lbs it is heavier than most home-style alarms, and it suits buyers who want simple certified CO protection on a budget. |
– |
– |
– |
– |
|
A 6-in-1 vehicle emergency tool that combines a CO alarm with an LED flashlight, red and white warning lights, a window-breaking hammer and a seat belt cutter. The CO alarm sounds and flashes at 70 ppm, a higher threshold than most detectors here, and it has no UL 2034 or calibration certification. It recharges over USB and attaches magnetically, so it suits a glovebox backup rather than primary CO protection while sleeping. |
– |
– |
CO |
– |
|
A compact 70 mm round CO alarm with an electrochemical Figaro sensor rated for 10 years, an 85 dB alarm, LED light and a lithium battery. At 0.23 lbs it is lighter than the other UL 2034 listed alarms here and one of the lower-priced options, though it has no digital display. Like similar home alarms it is rated for 40 to 100 ℉, so it suits small spaces kept above freezing. |
– |
– |
CO |
– |
|
Running on two replaceable AA batteries, this compact UL 2034 listed CO alarm has an LCD that shows live readings from 20 to 999 ppm, an early warning at 30 ppm and an 85 dB danger alarm with 12-hour alarm memory. Its 30 ppm early warning is lower than most home-style alarms, and at 0.27 lbs it is among the lighter ones. Rated for 40 to 100 ℉, it suits vans kept above freezing. |
20 |
999 |
CO |
– |
|
A home-style CO alarm with an electrochemical sensor, 85 dB horn and sealed lithium battery that needs no replacement or low-battery chirps for its 10-year life. It is UL 2034 5th Edition and ETL listed, weighs 0.28 lbs and can sit on a table or be wall mounted. Its 40 to 100 ℉ operating range is narrower than most portable meters, so it suits a heated van or camper cabin. |
– |
– |
CO |
– |
|
First Alert's sealed 10-year lithium battery CO alarm has a backlit digital display showing CO level and temperature, plus a Peak Level memory of the highest reading. It is UL 2034 listed with an 85 dB alarm, an end-of-life chirp and a 10-year warranty. At 0.94 in. it is slimmer than the other alarms here but heavier than the Kidde and Heiman models at 0.50 lbs. |
– |
– |
CO |
– |
|
A sealed-battery version of Heiman's low-level digital CO alarm, with a non-replaceable lithium battery and a sensor rated for 10 years. The LCD shows live CO from 20 to 999 ppm, with a 30 ppm early warning and an 85 dB alarm, and it is UL 2034 listed. It offers more low-level detail than most home-style alarms, while its 40 to 100 ℉ range is narrower than handheld meters. |
20 |
999 |
CO |
– |
|
A UL 2034 listed home-style carbon monoxide (CO) alarm, not a CO2 monitor, with a sealed 10-year lithium battery, a backlit digital display and an 85 dB alarm. It gives a separate early warning at 30 to 70 ppm for children, seniors and pets, and its 10-year warranty is longer than most portable meters offer. Its 40 to 100 ℉ operating range is narrower than handheld meters, so it suits vans kept above freezing. |
– |
– |
CO |
– |
|
This handheld CO detector reads 0 to 1000 ppm on a color display and alerts with light, sound and vibration at two adjustable thresholds. It also stores alarm history, offers zero and span calibration, has a built-in flashlight and recharges over USB-C. Its 3-year warranty is longer than most portable meters, and it suits buyers wanting an inexpensive rechargeable meter for checking heaters and campsites. |
0 |
1,000 |
CO |
– |
|
A 2-in-1 detector that reads carbon monoxide from 0 to 999 ppm and combustible gases such as propane and natural gas from 0.1 to 20% LEL. A 6.5-inch extendable probe reaches tight spots around gas fittings, and it has a color LCD, rechargeable battery and a 3-year warranty. One of the few here combining CO with propane leak detection without the cost of a four-gas monitor, it suits vans with propane appliances. |
0 |
999 |
CO and LEL (combustible gas) |
– |
|
A rechargeable handheld CO meter with a 0 to 1000 ppm range, a color TFT display with a trend graph, adjustable alarm thresholds and light, sound and vibration alerts. It uses an electrochemical sensor, stores alarm records and offers zero calibration. Priced below most NIST-calibrated meters, it suits buyers who want a meter to check heaters and cabins rather than a fixed alarm. |
0 |
1,000 |
CO |
±5% F.S. |
|
A pocket CO monitor made for travel, alarming at 25 ppm, lower than the 30 to 70 ppm levels of several others in the table. It weighs 0.20 lbs, among the lightest listed, measures 2.15 by 2.15 by 1.57 in., survived a 20 ft drop test and runs about 10 days per charge. With a 1 year warranty, it suits hotel, camping and flight use over fixed installs. |
– |
– |
– |
– |
|
A portable four-gas detector for CO, H2S, O2 and combustible gas, with an aluminum-alloy style body, LCD display and sound, light and vibration alarms. Accuracy is ±5% F.S., the 1800 mAh battery is rechargeable, and it weighs 0.65 lbs. It is a compact, mid-priced multi-gas option that suits those wanting several gases in one clip-on unit rather than a CO-only alarm. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
±5% F.S. |
|
A clip-on four-gas monitor detecting CO, H2S, O2 and combustible gas (LEL), with LED, vibration and sound alarms and an 1800 mAh rechargeable battery. It weighs 0.55 lbs and is one of the taller units at 7.87 in., but slim at 1.18 in. wide. With no listed alarm levels or certifications in the table, it suits buyers wanting broad gas coverage at a mid-range price. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
98% |
|
A rugged handheld CO meter reading 0 to 1000 ppm with 1 ppm resolution, IP67 waterproofing and a 20 ft drop rating. It runs about two years on a 9V lithium battery, alerts with a 90 dB buzzer, LED and vibration at adjustable levels, and shows TWA and STEL readings. It ships with a NIST calibration certificate, and its 90 dB alarm is louder than the 85 dB home-style alarms, though its 1-year warranty is shorter. |
0 |
1,000 |
CO |
±5% F.S. |
|
A disposable personal CO detector with a sealed battery that runs about two years, after which the whole unit is replaced. It reads 0 to 1000 ppm with 1 ppm resolution, is IP67 waterproof, ships with a NIST calibration certificate and alerts by 90 dB buzzer, LED and vibration, including OSHA TWA and STEL alarms. At 0.25 lbs it is lighter than most handheld meters, but its 32 ℉ minimum operating temperature is higher than many. |
0 |
1,000 |
CO |
±5% F.S. |
|
A handheld CO meter covering 0 to 1000 ppm with 1 ppm resolution, ±5% F.S. accuracy and a 30 s response time, shipped with a NIST calibration certificate. It is ATEX certified, offers zero and span calibration and alerts by sound, light and vibration at adjustable levels. Its 1500 mAh battery lasts about 24 hours and recharges over Micro-USB, and its 0 ℉ minimum operating temperature suits colder vans than home alarms. |
0 |
1,000 |
CO |
±5% F.S. |
|
A four-gas monitor that reads CO from 0 to 1000 ppm at 1 ppm resolution, plus H2S, O2 and combustible gas, with adjustable low and high alarms at 50 and 200 ppm. It runs 12 hours on a 2000 mAh battery, works from -4 to 122 ℉ and weighs 0.44 lbs. Its 3-year warranty is longer than most meters in the table, though it lacks NIST calibration, making it a mid-priced multi-gas option. |
0 |
1,000 |
CO, H2S, O2 and LEL (combustible gas) |
CO ±10% |
|
A four-gas personal monitor for combustible gas (LEL), hydrogen sulfide, oxygen and carbon monoxide; it does not measure CO2. It alerts with voice prompts, a 120 dB alarm, vibration and light, runs on an 1800 mAh lithium battery and clips onto clothing. Built for confined-space and industrial work, it suits buyers needing gas-leak and oxygen safety rather than ventilation tracking. |
– |
– |
– |
– |
|
A four-gas monitor for CO, H2S, O2 and combustible gas with LED, vibration and sound alarms and a 0.5 s response claim. It charges in 4 hours for a 15 hour runtime, has no TWA/STEL alarms and carries a 3 year warranty, longer than most in the table. At 1.32 lbs it is among the heaviest listed, so it suits a stored work kit more than a pocket. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
– |
|
A single-gas CO clip that reads 0 to 300 ppm with 35 and 200 ppm alarms at 95 dB, among the loudest listed. Its sealed battery runs 17520 hours with no charging, it weighs 0.20 lbs, is IP66/67 rated and works down to -22 ℉, the lowest in the table. With a narrower range than most and ATEX, IECEx and Class I Div. 1 approvals, it suits wear-and-forget CO monitoring. |
0 |
300 |
CO |
– |
|
A four-gas clip-on monitor for CO, H2S, O2 and combustible gas, using electrochemical sensors with adjustable alarm levels, an LCD color screen and a rechargeable 1800 mAh battery. It logs up to 120,000 data groups and measures 6.00 in. tall. Adjustable alarms are shared with only some multi-gas units listed, so it suits buyers wanting configurable thresholds without a premium price. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
– |
|
A low-level CO monitor whose LCD shows readings from 10 ppm and alarms at 25 ppm and 50 ppm, lower thresholds than any other detector in the table. It has a sealed lithium battery, a 7-year sensor and an 85 dB buzzer, and works from 20 to 122 ℉, wider than the home-style alarms. It is not UL 2034 listed and its ±30% accuracy is looser than handheld meters, so it suits buyers who want early warning of small CO leaks. |
10 |
999 |
CO |
±30% of reading |
|
A handheld CO meter reading 0 to 1000 ppm at 1 ppm resolution, with an electrochemical sensor rated for 5.0 years, low and high alarms at 35 ppm and 200 ppm, and TWA/STEL exposure alarms. It runs on AAA batteries and shows CO and temperature on a backlit display. It is not NIST calibrated or UL 2034 listed, and at 7.75 in. it is longer than most, so it suits spot checks. |
0 |
1,000 |
CO |
±5% or 5 ppm, whichever is greater |
|
A compact CO monitor reading 0 to 500 ppm at 1 ppm resolution, with a 20 s response time, among the fastest listed, and fixed 35 ppm and 200 ppm alarms at 80 dB. Its IP67 housing is one of the slimmest at 0.86 in. and weighs 0.25 lbs, with a replaceable sensor and CR123A battery. Without NIST calibration or adjustable alarms, it suits buyers wanting a rugged, wearable CO monitor. |
0 |
500 |
CO |
CO ±10% |
|
A four-gas monitor for CO, H2S, O2 and combustible gas with a TFT color screen, USB data export and an O2 sensor rated for 5 years. It charges in 2.5 hours, faster than the other multi-gas units listed, and runs 18 hours. It lists UL and FCC marks and a 3 year warranty, so it suits buyers wanting a more featured multi-gas clip. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
– |
|
A handheld CO analyzer with a sampling pump, reading 1 to 1000 ppm at 1 ppm resolution with adjustable audio, visual and vibration alarms. It is NIST-calibrated, ATEX certified, USB rechargeable in about 3 hours and carries a 1 year warranty. The pump lets it draw air from vents and hidden spaces, which few others in the table offer, and it suits buyers wanting a measuring tool over a fixed alarm. |
1 |
1,000 |
– |
– |
|
Built for pilots, this pocket CO monitor reads 0 to 500 ppm with 1 ppm resolution and has one of the fastest response times here at 20 s (T90). Its programmable low and high alarms (35 and 200 ppm by default) alert by sound, LED and vibration, and it tracks 24-hour TWA exposure. Rated for -4 to 122 ℉ with a 2-year warranty, it is a premium choice for cold-weather use where home alarms fall short. |
0 |
500 |
CO |
CO ±10% |
|
A four-gas meter that reads CO from 0 to 999 ppm at 1 ppm resolution, plus H2S, O2 and combustible gas, with USA NIST traceable calibration. It has electrochemical sensors, adjustable audio, visual and vibration alarms and a 2000 mAh lithium-ion battery, and it is one of the few meters listed that charges over USB-C. It suits buyers who want calibrated CO readings plus wider gas checks in one handheld. |
0 |
999 |
CO, H2S, O2 and LEL (combustible gas) |
≤ ±5% F.S. |
|
A USA NIST calibrated four-gas monitor that reads CO from 0 to 1000 ppm at 1 ppm resolution, plus H2S, O2 and combustible gas, with a 30 s response time and ±5% F.S. accuracy. It runs 20 hours on a 2000 mAh battery, has adjustable alarms and ATEX certification, and weighs 0.51 lbs. It suits buyers who want calibrated, certified multi-gas readings over long days. |
0 |
1,000 |
CO, H2S, O2 and LEL (combustible gas) |
±5% F.S. |
|
A four-gas monitor for CO, hydrogen sulfide, oxygen and combustible gas (LEL); it does not measure CO2. It has a color screen with graphs, data logging, NIST calibration, ATEX certification and a 2000 mAh lithium-ion battery that lasts 20 hours and recharges over Micro-USB. Pricier than most CO-only detectors, it suits buyers who also want propane-leak and oxygen warnings, though it needs regular recharging unlike sealed-battery alarms. |
0 |
999 |
CO, H2S, O2 and LEL (combustible gas) |
±5% F.S. |
|
An inspector-grade CO meter with a built-in pump and 4 ft probe, reading 0 to 1000 ppm at 1 ppm resolution with USA NIST traceable calibration. It has a color screen with graphing, USB data logging, adjustable alarms and a 3200 mAh battery that charges in 4.0 hours. One of the few with a pump and among the priciest in the table, it suits detailed inspection work rather than overnight monitoring. |
0 |
1,000 |
CO |
≤ ±5% F.S. |
|
A carbon monoxide (CO) detector, not a CO2 monitor, with alarms at 25 ppm and 100 ppm. It is sealed to IP67, runs maintenance-free for two years on its built-in battery, and alerts by flashing LEDs, sound and vibration while logging the last 25 events. UL and CSA listed for hazardous locations, it suits buyers who want rugged CO protection rather than ventilation monitoring. |
– |
– |
– |
– |
|
BW's four-gas clip reads CO from 0 to 500 ppm at 1 ppm resolution, plus H2S, O2 and combustible gas, with 35 and 200 ppm alarms at 95 dB and TWA/STEL alarms. It is IP68 rated, the highest in the table, has a 5.0-year sensor life and holds ATEX, IECEx and Class I Div. 1 approvals. As the priciest detector listed, it suits professional use more than typical van setups. |
0 |
500 |
CO, H2S, O2 and LEL (combustible gas) |
CO ±10% |
|
A four-gas detector with a built-in pump that reads CO from 0 to 1000 ppm at 1 ppm resolution, plus H2S, O2 and combustible gas, with a 30 s response time and adjustable 50 and 150 ppm alarms. It has a 3000 mAh battery charged over USB-C and comes with a calibration cap and certificate. One of the few pump models listed, it suits sampling hard-to-reach spaces, though its 8 hour runtime is the shortest in the table. |
0 |
1,000 |
CO, H2S, O2 and LEL (combustible gas) |
– |
|
A battery-operated home CO alarm with an electrochemical sensor, digital display and Peak Level memory showing the highest CO concentration measured. It sounds an 85 dB alarm, has an end-of-life signal and a 7-year warranty. At 0.70 lbs it is one of the heaviest home-style alarms in the table, so it suits buyers who want a readout and don't mind the bulk. |
– |
– |
– |
– |
|
A four-gas monitor covering CO, H2S, O2 and combustible gas, with LED, vibration and sound alarms, an alarm record and password protection against accidental changes. Battery runtime is 14 hours and the warranty is 3 years, longer than most in the table. At 1.34 lbs it is the heaviest unit listed, so it suits a work or home kit more than carrying on the body. |
– |
– |
CO, H2S, O2 and LEL (combustible gas) |
– |