-
Portable power stations
Portable power stations are a convenient way to get electricity for your devices and small appliances while camping or on the road. They don't make their own power; they are large batteries that can be charged from an outlet, your car, or solar panels. These are sometimes marketed as "solar generators" (recharged via solar) and can be used in place of fuel-powered generators for some uses. Popular brands include Bluetti, Jackery, EcoFlow, GoalZero, and Anker. Smaller brands often use cheaper batteries and components, and are less likely to provide detailed product specifications, so don't shop on price alone. To appear on this list, a device must have at least 100Wh capacity and at least 1 AC outlet.
-
LiFePO4 batteries
LiFePO4 batteries (lithium iron phosphate, sometimes written LFP) are the most popular deep-cycle batteries for vehicle electrical systems, mostly replacing lead-acid and AGM batteries. They weigh about half as much, last thousands of charge cycles, and you can use nearly all of their rated capacity, while lead-acid batteries should only be drained about halfway. Capacity is listed in amp-hours (Ah); a 12V 100Ah battery holds about 1,280Wh. A built-in battery management system (BMS) protects the cells. Most LiFePO4 batteries must not be charged below freezing, 32℉ (0℃), so if you camp in the cold, look for low-temperature cut-off or self-heating. Unlike a portable power station, a bare battery has no outlets or inverter, so it needs a charger and a solar charge controller. Popular brands include Battle Born, Renogy, LiTime, SOK and Epoch.
-
Solar charge controllers
Solar charge controllers sit between your solar panels and your battery, and control the charging so the battery is charged properly and isn't damaged. MPPT controllers turn more of the panel's power into charge than PWM controllers, especially in cold weather or with higher-voltage panels. PWM controllers are cheaper and work fine for small, simple setups. To pick a size, divide your total panel watts by your battery voltage and leave some room to spare (for example, 400W ÷ 12V ≈ 33A, so choose 40A). Also make sure your panels' open-circuit voltage (Voc) stays below the controller's maximum PV input voltage, because Voc goes up in the cold. For lithium batteries, look for a LiFePO4 charging profile and low-temperature charge cut-off. Be careful with very cheap controllers that claim high ratings like "100A MPPT": their real performance is often far lower. Popular brands include Victron, Renogy, EPEver, BougeRV and LiTime. You don't need a separate controller for a portable power station, which has one built in.
-
Power banks