Solar charge controllers
Solar charge controllers sit between your solar panels and your battery, and control the charging so the battery is charged properly and isn't damaged. MPPT controllers turn more of the panel's power into charge than PWM controllers, especially in cold weather or with higher-voltage panels. PWM controllers are cheaper and work fine for small, simple setups. To pick a size, divide your total panel watts by your battery voltage and leave some room to spare (for example, 400W ÷ 12V ≈ 33A, so choose 40A). Also make sure your panels' open-circuit voltage (Voc) stays below the controller's maximum PV input voltage, because Voc goes up in the cold. For lithium batteries, look for a LiFePO4 charging profile and low-temperature charge cut-off. Be careful with very cheap controllers that claim high ratings like "100A MPPT": their real performance is often far lower. Popular brands include Victron, Renogy, EPEver, BougeRV and LiTime. You don't need a separate controller for a portable power station, which has one built in.
Not sure what size you need? Answer a few questions
47 products
| 47 products | Outlets | Physical Attributes | Operating Temp Range | Internals | Physical Attributes | Safety | Physical Attributes | Core specs | Charging | Power | Charging | Safety | Charging | Outlets | Controls | Internals | Physical Attributes | Internals | Physical Attributes | Safety | Warranty & Certification | ||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product | Price | Reviews | Brand | Model | Description | Manufacturer page | User manual | Popular brand | USB-A ports count | Weight lbs | Weight kg | Length in. | Length mm | Width in. | Width mm | Depth/Height in. | Depth/Height mm | IP rating | Operating temp min ℉ | Operating temp min ℃ | Operating temp max ℉ | Operating temp max ℃ | App connectivity | Housing material | Overheat protection | Low-voltage protection | Display type | Controller type | Rated charge current A | Battery system voltages | Auto voltage detection | Max PV input voltage (Voc) V | Max solar input (12V battery) W | Max solar input (24V battery) W | Max solar input (48V battery) W | Peak conversion efficiency % | MPPT tracking efficiency % | Self-consumption mA | Battery types supported | LiFePO4 charging profile | User-defined charge voltages | Lithium reactivation | Low-temp charge cut-off | Battery temp sensor included | Charging stages | Load output current A | Load control modes | Communication port | Parallel operation | Cooling | Grounding type | Max terminal wire size AWG | Max terminal wire size (mm²) mm² | Reverse polarity protection | Warranty | Certifications summary | CE marked | UL 1741 listed | CSA C22.2 No. 107.1 | IEC 62109-1 certified | RoHS compliant | FCC Part 15 compliant | Year released | Years on market | |
$106.99 | – | BougeRV | ISE218 | This 40 A MPPT controller pairs built-in Bluetooth with a backlit LCD, a low-temperature charging cut-off with included battery sensor, and reactivation of dormant LiFePO4 batteries. Its 10 mA self-consumption is the lowest listed, and its -31 ℉ to 149 ℉ (-35 to 65 ℃) operating range is wider than most, suiting lithium van builds in cold climates. The listing gives the maximum PV input as both 100 V and 95 V. | Yes | – | 3.95 | 1.79 | 8.94 | 227 | 6.26 | 159 | 2.95 | 75 | IP34 | -31 | -35 | 149 | 65 | Bluetooth | – | Yes | – | Backlit LCD | MPPT | 40 | 12/24V | Yes | 100 | 600 | 1,200 | – | 99.0 | 99.5 | 10.0 | LiFePO4, SLD, GEL, FLD, AGM, User Defined | Yes | Yes | Yes | Yes | Yes | – | 20 | – | – | – | – | Common negative | 8 | – | Yes | 18 Months | CE, RoHS | Yes | – | – | – | Yes | – | – | – | ||||
$118.99 | Mixed | EPEVER | Tracer4210AN G3 | A 40 A MPPT controller for 12/24V systems with automatic voltage detection, an LCD, a 100 V PV input limit and room for 520 W at 12V or 1040 W at 24V. It has a LiFePO4 profile, user-defined charge voltages and a 40 A load output, which is double the 20 A of other controllers listed with a load output. Bluetooth is not built in, only an RS485 port, so it suits wired setups. | No | – | 3.64 | 1.65 | 9.92 | 252 | 7.09 | 180 | 2.48 | 63 | IP30 | -13 | -25 | 113 | 45 | Bluetooth (optional module) | – | Yes | Yes | LCD | MPPT | 40 | 12/24V | Yes | 100 | 520 | 1,040 | – | 98.0 | 99.5 | 8.0 | Sealed, Gel, FLD, LiFePO4, Li(NiCoMn)O2, User-defined | Yes | Yes | Yes | Yes | No | Bulk, Boost, Float | 40 | – | RS485 (RJ45) | – | – | Common negative | 6 | 16 | Yes | – | EN/IEC, EMC, RoHS | – | – | – | – | Yes | – | – | – | ||||
$239.99 | Mixed | EPEVER | Tracer 6415AN | A 60 A MPPT unit with automatic 12/24/36/48V detection, a backlit LCD, 98.6% peak conversion efficiency and profiles for LiFePO4, Li(NiCoMn)O2 and user-defined batteries, plus low-temperature charge cut-off. Its terminals take wire up to 2 AWG (35 mm²), among the largest listed, and it offers RS485 Modbus through an RJ45 port. At 4.50 kg with an IP20 case, it suits indoor mounting in larger 24V or 48V systems. | No | – | 9.92 | 4.50 | 13.39 | 340 | 9.29 | 236 | 4.69 | 119 | IP20 | -13 | -25 | 140 | 60 | – | – | Yes | – | Backlit LCD | MPPT | 60 | 12/24/36/48V | Yes | 150 | 750 | 1,500 | 3,000 | 98.6 | – | – | Sealed, Gel, Flooded, User-defined, LiFePO4, Li(NiCoMn)O2 | Yes | Yes | – | Yes | – | Lead-acid: equalize, boost, float; lithium: see manual | – | – | RJ45, RS485 (Modbus) | Yes | Passive (no fan) | Common negative | 2 | 35 | – | – | EN/IEC 62109-1, EN 61000-6-1/-6-3, FCC Part 15 Subpart B, RoHS | – | – | – | Yes | Yes | Yes | – | – | ||||
– | – | Genasun | GV-10-Li-14.2V | A small 10.5 A MPPT controller made only for 12V 4S LiFePO4 batteries, charging with a fixed CC/CV profile at 14.2V. At 0.41 lbs with 0.9 mA self-consumption, it is the lightest MPPT unit listed and draws far less than the others, and its -40 ℃ to 85 ℃ range is the widest in the table. With no load output and a 5-year warranty, it suits small lithium setups with up to 140 W of panels. | No | – | 0.41 | 0.19 | 5.40 | 137 | 2.40 | 62 | 1.30 | 33 | IP40 | -40 | -40 | 185 | 85 | – | – | Yes | – | LED indicators | MPPT | 10 | 12V | – | 34 | 140 | – | – | 98.3 | – | 0.9 | LiFePO4 (4S, fixed 14.2V) | Yes | – | – | – | – | CC/CV | 0 | – | – | – | Passive (no fan) | – | 10 | 5 | Yes | 5 Years | cETLus, CE, FCC, RoHS; UL 1741, CSA C22.2 #107.1, HazLoc C1D2 | Yes | Yes | Yes | – | Yes | Yes | – | – | ||||
$99.99 | – | ipandee | IPD-ESF48H60 | Auto-detecting 12/24/36/48V MPPT controller rated at 60 A with a 200 V PV input, which is among the higher input limits listed, allowing up to 3,120 W on a 48V battery. It has a backlit LCD, an intelligent-speed fan, five load modes and an RJ45 RS485 Modbus port, with Bluetooth only through an optional module. A fit for large off-grid or RV arrays on a budget. | – | – | No | – | 3.75 | 1.70 | 9.40 | 239 | 6.50 | 165 | 2.60 | 66 | – | -4 | -20 | 122 | 50 | Bluetooth (optional module) | – | Yes | – | Backlit LCD | MPPT | 60 | 12/24/36/48V | Yes | 200 | 780 | 1,560 | 3,120 | 98.0 | 99.9 | – | LiFePO4, Lithium-Ion, AGM, Gel, Flooded, Sealed Lead-Acid, User-Defined | – | Yes | Yes | – | – | CC Fast Charge, CV Constant Voltage, CF Float Charge | – | Normal, Always-On, Light Control, Light+Timer, Dual-Period Timer | RJ45 (RS485, Modbus) | – | Fan (intelligent speed) | – | – | – | Yes | 2 years | – | – | – | – | – | – | – | – | – | ||
$199.99 | Mixed | Litime | L48V60A-MPPT-BT-E | A 60 A MPPT controller with automatic 12/24/36/48V detection, built-in Bluetooth, an LCD with LED indicators and a LiFePO4 profile. It accepts 150 V of PV input, up to 3,200 W at 48V, and has a 20 A load output. At 10.03 lbs it is the heaviest unit with a listed weight, its 97.0% peak efficiency is at the low end, and it is not waterproof. Suits indoor RV and home systems. | Yes | – | 10.03 | 4.55 | 11.02 | 280 | 4.04 | 103 | 8.27 | 210 | – | -31 | -35 | 113 | 45 | Bluetooth | Aluminum | Yes | – | LCD with LED indicators | MPPT | 60 | 12/24/36/48V | Yes | 150 | 900 | 1,800 | 3,200 | 97.0 | – | – | Sealed, Gel, Flooded, AGM, LiFePO4 | Yes | – | – | – | – | – | 20 | – | – | – | – | – | – | – | Yes | – | CE, FCC, RoHS | Yes | – | – | – | Yes | – | – | – | ||||
$298.00 | – | Morningstar Corporation | SS-MPPT-15L | A compact 15 A MPPT controller for 12/24V systems with an aluminum case, 97.5% peak efficiency and a 15 A load output. Its -40 to 60 ℃ range reaches the lowest minimum temperature in the table, but it has a modest 60 V PV input, draws 35 mA itself, which is more than most, and is the highest-priced listing. It suits small professional or cold-climate installs. | – | – | 1.30 | 0.60 | 6.60 | 169 | 2.50 | 64 | 2.90 | 73 | IP10 | -40 | -40 | 140 | 60 | – | Aluminum | Yes | – | – | MPPT | 15 | 12/24V | – | 60 | 260 | 520 | – | 97.5 | – | 35.0 | Gel, Sealed, AGM, Flooded; lithium with custom settings | – | – | – | – | No | Bulk, absorption, float, equalize (4-stage) | 15 | – | – | – | – | – | 6 | 16 | Yes | 5 years | – | Yes | Yes | Yes | Yes | Yes | Yes | – | – | ||||
$67.99 | Mixed | Renogy | RNG-CTRL-RVR20 | This 20 A MPPT controller in a die-cast aluminum case has an LCD with LED indicators, an included battery temperature sensor and lithium reactivation. It handles 260 W at 12V or 520 W at 24V and adds a 20 A load output with timer and light-control modes plus RS485, though its 100 mA self-consumption is among the highest listed. The title claims Bluetooth and 95 V input, while the specifications show no built-in Bluetooth and 100 V. | Yes | – | 3.10 | 1.40 | 8.27 | 210 | 5.95 | 151 | 2.69 | 68 | IP32 | -31 | -35 | 113 | 45 | – | Metal | – | Yes | LCD with 4 buttons and LED indicators | MPPT | 20 | 12/24V | Yes | 100 | 260 | 520 | – | 98.0 | 99.0 | 100.0 | AGM, Gel, Flooded, Lithium, User-defined | – | Yes | Yes | – | Yes | Lead-acid: bulk, boost, float (+ equalization); lithium: bulk, boost | 20 | Automatic (light control), timer (14 settings), manual (default), no delay, 24-hour | RS485 (Modbus) | – | – | Common negative | 8 | – | Yes | 2 Years | FCC Part 15 Class B, CE, RoHS, RCM | Yes | – | – | – | Yes | Yes | – | – | ||||
$144.49 | Mixed | Renogy | RNG-CTRL-RVR40 | A 40 A MPPT controller for 12/24V systems with a 4-button LCD, low-temperature charging cut-off with included battery sensor, lithium reactivation and a 20 A load output with timer and light-control modes. Bluetooth needs the separate BT-2 module, and its 100 mA self-consumption is among the highest, but it fits van owners who want a proven wired controller. The listing gives a maximum operating temperature of 113 ℉ (45 ℃) in its specifications but 149 ℉ in its features. | Yes | – | 4.40 | 2.00 | 9.38 | 238 | 6.78 | 172 | 3.05 | 77 | IP32 | -31 | -35 | 113 | 45 | – | – | – | Yes | LCD with 4 buttons | MPPT | 40 | 12/24V | Yes | 100 | 520 | 1,040 | – | 98.0 | 99.0 | 100.0 | AGM, Gel, Flooded, Lithium, User-defined | – | Yes | Yes | Yes | Yes | Lead-acid: bulk, boost, float (+ equalization); lithium: bulk, boost | 20 | Automatic (light control), timer (14 settings), manual (default), no delay, 24-hour | RS485 (Modbus) | – | – | Common negative | – | – | Yes | 3 Years | FCC Part 15 Class B, CE, RoHS, RCM | Yes | – | – | – | Yes | Yes | – | – | ||||
$93.49 | – | Renogy | Rover Li 30A (RNG-CTRL-RVR30) | A 30 A MPPT controller for 12/24V systems with a 100 V PV input limit, room for 400 W at 12V or 800 W at 24V, an LCD and an RS485 Modbus port. It lists lithium reactivation, low-temperature charge cut-off, an included battery temperature sensor and five load control modes. Its 30 A rating sits between the common 20 A and 40 A models, and Bluetooth needs a separate module, so it suits wired 12V or 24V van systems. | Yes | – | 4.40 | 2.00 | 9.38 | 238 | 6.78 | 172 | 3.05 | 77 | IP32 | -31 | -35 | 113 | 45 | Bluetooth (BT-2 module, sold separately) | – | Yes | – | LCD | MPPT | 30 | 12/24V | Yes | 100 | 400 | 800 | – | – | 99.0 | – | AGM, Gel, Flooded, Lithium, User-defined | Yes | Yes | Yes | Yes | Yes | Lead-acid: bulk, boost, float (+ equalization); lithium: bulk, boost | 20 | Automatic, timing (1-14 h), manual (default), no delay, 24-hour | RS485 (Modbus) | – | Passive (no fan) | Common negative | 8 | 10 | Yes | 3 years (material and workmanship) | FCC Part 15 Class B, CE, RoHS, RCM | Yes | – | – | – | Yes | Yes | – | – | ||||
$206.98 | – | Renogy | Rover Lite 60A (RCC60RVRE) | This 60 A MPPT controller works with 12, 24, 36 or 48V batteries using automatic detection and a 150 V PV input, allowing up to 900 W at 12V, 1800 W at 24V or 3200 W at 48V. It has an LCD, LiFePO4 and user-defined profiles, a battery temperature sensor and passive cooling. At 7.71 lbs it is one of the heavier units listed, and Bluetooth needs an add-on module, so it suits larger fixed arrays. | – | Yes | – | 7.71 | 3.50 | 12.01 | 305 | 8.07 | 205 | 3.90 | 99 | IP32 | -31 | -35 | – | – | Bluetooth (BT-2 module, sold separately) | – | – | – | LCD | MPPT | 60 | 12/24/36/48V | Yes | 150 | 900 | 1,800 | 3,200 | – | – | – | AGM, Gel, Flooded, LiFePO4, User-defined | Yes | Yes | – | Yes | Yes | Lead-acid: bulk, boost, float, equalize; lithium: bulk, boost | 20 | – | RS485 | – | Passive (heat sink) | Common negative | – | – | – | 2 years (material and workmanship) | FCC Part 15 Class B, CE, RoHS | Yes | – | – | – | Yes | Yes | – | – | |||
– | Mostly positive | Victron Energy | SCC115045212 | Victron's 45 A SmartSolar MPPT works with 12, 24, 36 or 48V banks and up to 150 V of PV input, taking 650 W at 12V and 2600 W at 48V. Built-in Bluetooth links to the VictronConnect app, and VE.Direct allows wired monitoring. Its UL 1741, CSA and IEC 62109-1 certifications are ones most rivals lack, fitting mid-size van and RV systems. Its listed width and depth appear swapped compared with similar Victron models. | Yes | – | 2.76 | 1.25 | 7.32 | 186 | 2.76 | 70 | 5.12 | 130 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 45 | 12/24/36/48V | Yes | 150 | 650 | 1,300 | 2,600 | 98.0 | – | 20.0 | – | – | Yes | – | – | – | – | – | – | VE.Direct | – | – | – | 6 | 16 | Yes | – | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | Mostly positive | Victron Energy | SCC115060211 | Heavy-duty 60 A MPPT controller with 150 V PV input, built-in Bluetooth and Tr screw terminals that accept up to 2 AWG wire, larger than most. It handles 860 W at 12V up to 3440 W at 48V, supports parallel operation, and carries UL 1741, CSA and IEC certifications. At 6.6 lbs (3.0 kg) it is among the heavier units, suited to large RV or bus conversions. | Yes | – | 6.61 | 3.00 | 9.84 | 250 | 3.74 | 95 | 7.28 | 185 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 60 | 12/24/36/48V | Yes | 150 | 860 | 1,720 | 3,440 | 98.0 | – | – | – | – | Yes | – | – | – | – | – | – | VE.Direct | Yes | – | – | 2 | 35 | Yes | – | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | Mostly positive | Victron Energy | SCC115070211 | A 70 A SmartSolar MPPT with Tr screw terminals for wire up to 2 AWG, built-in Bluetooth, VE.Direct and support for parallel operation with other units. It accepts 150 V of PV input and up to 1000 W at 12V or 4000 W at 48V. Carrying UL 1741, CSA and IEC 62109-1 certifications, it is one of the higher-current controllers listed at 6.6 lbs (3.0 kg), for large RV and bus solar arrays. | Yes | – | 6.61 | 3.00 | 9.84 | 250 | 3.74 | 95 | 7.28 | 185 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 70 | 12/24/36/48V | Yes | 150 | 1,000 | 2,000 | 4,000 | 98.0 | – | – | – | – | Yes | – | – | – | – | – | – | VE.Direct | Yes | – | – | 2 | 35 | Yes | – | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | – | Victron Energy | SCC125110411 | Victron's 100 A Tr VE.Can MPPT accepts up to 250 V of PV input, tied for the highest listed, and up to 5800 W on a 48V bank, also the highest listed. It cools passively with no fan, has built-in Bluetooth, VE.Can and VE.Direct ports, parallel operation and 2 AWG terminals, but no load output. With a 5-year warranty and UL 1741 listing, it suits large 48V off-grid or bus systems. | Yes | – | – | – | – | – | – | – | – | – | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 100 | 12/24/36/48V | Yes | 250 | 1,450 | 2,900 | 5,800 | 99.0 | – | – | – | Yes | Yes | – | – | No | – | 0 | – | VE.Can, VE.Direct | Yes | Passive (no fan) | – | 2 | 35 | Yes | 5 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | Yes | – | – | ||||
– | Mostly positive | Victron Energy | SmartSolar MPPT 75/10 | The smallest Victron SmartSolar listed, this 10 A MPPT handles up to 75 V of PV input, 145 W at 12V or 290 W at 24V. It has built-in Bluetooth, a 15 A load output, VE.Direct and UL 1741 certification, and weighs 1.1 lbs (500 g). Its 5-year warranty is among the longest, so it suits a single panel on a small van, camper or trailer. | Yes | – | 1.10 | 0.50 | 4.45 | 113 | 3.94 | 100 | 1.57 | 40 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | Yes | – | MPPT | 10 | 12/24V | Yes | 75 | 145 | 290 | – | 98.0 | – | 20.0 | Lithium, AGM, Gel, Flooded | – | Yes | – | – | – | – | 15 | – | VE.Direct | – | – | – | 10 | 6 | Yes | 5 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 No. 107.1 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | Mostly positive | Victron Energy | SmartSolar MPPT 75/15 | Compact 15 A MPPT controller for 12/24V systems with built-in Bluetooth, a 15 A load output and 75 V PV input, handling 220 W at 12V or 440 W at 24V. At 1.1 lbs (500 g) it is one of the lightest MPPT units listed, and it carries UL 1741 certification and a 5-year warranty, longer than most. Well matched to one or two panels on a small van or camper. | Yes | – | 1.10 | 0.50 | 4.45 | 113 | 3.94 | 100 | 1.57 | 40 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | Yes | – | MPPT | 15 | 12/24V | Yes | 75 | 220 | 440 | – | 98.0 | – | 20.0 | Lithium, AGM, Gel, Flooded | – | Yes | – | – | – | – | 15 | – | VE.Direct | – | – | – | 10 | 6 | Yes | 5 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 No. 107.1 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | Mostly positive | Victron Energy | SmartSolar MPPT 100/30 | Mid-range 30 A SmartSolar MPPT for 12/24V systems with built-in Bluetooth, a VE.Direct port, 100 V maximum PV input and 440 W at 12V or 880 W at 24V. It has passive cooling with no fan, lithium reactivation, a -30 to 60 ℃ operating range and UL 1741 listing. Its 30 mA self-consumption is higher than the 20 mA of several other Victron models, but it suits vans wanting app monitoring. | – | – | Yes | – | 2.87 | 1.30 | 5.12 | 130 | 7.32 | 186 | 2.76 | 70 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | LED indicators | MPPT | 30 | 12/24V | Yes | 100 | 440 | 880 | – | 98.0 | – | 30.0 | – | – | Yes | Yes | – | No | – | – | – | VE.Direct | – | Passive (no fan) | – | 6 | 16 | Yes | 2 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | – | – | – | ||
– | Mostly positive | Victron Energy | SmartSolar MPPT 100/50 | A 50 A SmartSolar MPPT for 12/24V systems with 100 V PV input, handling 700 W at 12V or 1400 W at 24V. It cools passively, links to the VictronConnect app over built-in Bluetooth, and carries UL 1741, CSA and IEC certifications plus a 5-year warranty. At 2.9 lbs (1.3 kg) it is lighter than most controllers of similar current, a fit for mid-size 12V van builds. | Yes | – | 2.87 | 1.30 | 7.32 | 186 | 5.12 | 130 | 2.76 | 70 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 50 | 12/24V | Yes | 100 | 700 | 1,400 | – | 98.0 | – | – | Lithium, AGM, Gel, Flooded | – | – | – | – | – | – | – | – | VE.Direct | – | Passive (natural cooling) | – | 6 | 16 | Yes | 5 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 | – | Yes | Yes | Yes | – | – | – | – | ||||
– | – | Victron Energy | SmartSolar MPPT 150/35 | Mid-size 35 A SmartSolar MPPT that auto-detects 12, 24, 36 or 48V batteries and takes up to 150 V of PV input, handling 500 W at 12V or 2000 W at 48V. Built-in Bluetooth, VE.Direct, UL 1741 certification and a 5-year warranty match other Victron models. At 2.8 lbs (1.25 kg), it suits vans and RVs wiring panels in series for higher voltage. | Yes | – | 2.76 | 1.25 | 7.32 | 186 | 5.12 | 130 | 2.76 | 70 | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | Yes | – | – | MPPT | 35 | 12/24/36/48V | Yes | 150 | 500 | 1,000 | 2,000 | 98.0 | – | 20.0 | Lithium, AGM, Gel, Flooded | – | Yes | – | – | – | – | – | – | VE.Direct | – | – | – | 6 | 16 | Yes | 5 Years | EN/IEC 62109-1, UL 1741, CSA C22.2 No. 107.1 | – | Yes | Yes | Yes | – | – | – | – | ||||
$29.99 | – | BougeRV | ISE136 | A low-cost 30 A PWM controller for 12/24V systems with a backlit color LCD and support for lead-acid, LiFePO4, ternary lithium and LTO batteries, a broader list than most. It can reactivate over-discharged lithium batteries and handles 450 W at 12V. Its 55 V PV input limit and PWM design make it better for small single-panel setups than larger arrays. | Yes | – | 0.80 | 0.36 | 5.92 | 150 | 3.95 | 100 | 1.92 | 49 | IP32 | -31 | -35 | 113 | 45 | – | – | – | – | Backlit color LCD | PWM | 30 | 12/24V | Yes | 55 | 450 | 900 | – | – | – | – | SLD, FLD, GEL, AGM, SLA, LiFePO4, ternary lithium, LTO | Yes | – | Yes | – | – | – | – | – | – | – | – | Negative ground | – | – | – | 18 Months | – | – | – | – | – | – | – | – | – | ||||
$39.99 | – | ECO-WORTHY | L03PWM30A2.1BW-1 | Budget 30 A PWM controller for 12/24V systems with an LCD, two 5V/2A USB ports and 30 days of built-in generation records. It offers LiFePO4, flooded, sealed, gel and custom charging profiles, and its 50 V maximum PV input is among the lowest listed, suiting small 12V panel setups in vans and boats. The listing says Bluetooth is built in, but also that Bluetooth and Wi-Fi need the separate BW0F data unit. | – | No | 2 | 0.53 | 0.24 | 5.91 | 150 | 3.70 | 94 | 1.30 | 33 | – | -4 | -20 | 140 | 60 | – | – | Yes | Yes | LCD | PWM | 30 | 12/24V | Yes | 50 | – | – | – | – | – | – | LFP, FLD, SLD, GEL, custom (CUS) | Yes | Yes | – | – | – | Bulk, absorption, float | – | – | – | – | – | – | – | – | Yes | – | – | – | – | – | – | – | – | – | – | |||
$149.99 | – | ipandee | ESF48H100 | This 100 A MPPT takes up to 250 V of PV input, tied for the highest listed, and up to 5200 W on a 48V bank, with 99.9% tracking efficiency claimed. It adds five load modes, RJ45 and RS485 ports, fan cooling, lithium reactivation and optional Bluetooth through a separate module. At 7.5 lbs (3.4 kg) it is heavy, and with a 1-year warranty it suits large off-grid systems on a tighter budget than Victron's 250/100. | – | – | No | – | 7.50 | 3.40 | 12.00 | 305 | 7.90 | 201 | 3.30 | 84 | – | – | – | – | – | Bluetooth (optional module) | – | Yes | – | Backlit LCD | MPPT | 100 | 12/24/36/48V | Yes | 250 | 1,300 | 2,600 | 5,200 | – | 99.9 | – | LiFePO4, Lithium-Ion, AGM, Gel, Flooded, Sealed Lead-Acid, User-Defined | Yes | Yes | Yes | – | – | CC Fast Charge, CV Constant Voltage, CF Float Charge | – | Normal, Always-On, Light Control, Light+Timer, Dual-Period Timer | RJ45, RS485 (Modbus) | – | Fan | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$115.99 | – | Litime | 30A 12V/24V MPPT Smart | Die-cast aluminum 30 A MPPT controller with built-in Bluetooth, an LCD with LED status lights, and a 20 A load output. It takes 100 V of PV input, 450 W at 12V or 900 W at 24V, and offers a LiFePO4 mode along with sealed and gel lead-acid. Its 3-year warranty is longer than most, though at 4.4 lbs (2.0 kg) it is heavy for a 30 A unit, fitting small van systems that want app monitoring. | Yes | – | 4.41 | 2.00 | 9.65 | 245 | 7.09 | 180 | 3.25 | 83 | – | – | – | – | – | Bluetooth | Metal | Yes | – | LCD with LED indicators | MPPT | 30 | 12/24V | Yes | 100 | 450 | 900 | – | 98.0 | 99.0 | – | LiFePO4, Sealed, Gel lead-acid | Yes | – | – | – | – | – | 20 | – | – | – | – | – | – | – | Yes | 3 Years | – | – | – | – | – | – | – | – | – | ||||
$105.44 | – | PowMr | POW-M80-PRO | An 80 A MPPT controller that auto-detects 12 to 48V systems and accepts up to 160 V of PV input, more than the 150 V of most high-current units. Up to 12 units can run in parallel, and it supports LiFePO4, NMC, lead-acid and user-defined profiles with lithium reactivation and fan cooling. Its 97.0% peak conversion efficiency is the lowest listed, but it is a budget route to 80 A. The listing gives the 24V maximum solar input as both 2400 W and 1920 W. | – | No | – | 5.38 | 2.44 | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | Yes | LCD | MPPT | 80 | 12/24/36/48V | Yes | 160 | 960 | 2,400 | 3,840 | 97.0 | 99.9 | – | Lithium, LiFePO4, Li(NiCoMn)O2, Flooded, Sealed, Gel, User-Defined | Yes | Yes | Yes | – | – | Bulk, Boost, Float | – | – | – | Yes | Fan | – | – | – | Yes | – | – | – | – | – | – | – | – | – | – | |||
$76.49 | – | Renogy | RCC-M10020-C2 | Renogy's compact 20 A MPPT controller pairs an LCD with built-in Bluetooth (about 49 ft / 15 m range), so no separate module is needed. It accepts up to 100 V PV input for 300 W at 12V or 600 W at 24V, with 99.0% tracking efficiency, LiFePO4 and user-defined profiles, a temperature sensor and parallel operation. Unlike Renogy's other Rover models listed, Bluetooth is built in, making it a small-footprint pick for van systems. | – | Yes | – | 1.06 | 0.48 | 6.38 | 162 | 4.25 | 108 | 2.24 | 57 | – | – | – | – | – | Bluetooth (built-in, about 49 ft / 15 m) | – | – | – | LCD | MPPT | 20 | 12/24V | Yes | 100 | 300 | 600 | – | – | 99.0 | – | Gel, Flooded, Sealed (AGM), LiFePO4, User-defined | Yes | Yes | – | – | Yes | – | 20 | – | RS485 | Yes | – | – | 8 | – | – | 2 years | RCM, FCC, CE, UKCA, ICID, RoHS, REACH, TSCA / CA65, TELEC, RF, R10 | Yes | – | – | – | Yes | Yes | – | – | |||
$152.18 | Mixed | Renogy | RNG-CTRL-RVR40-BT | A 40 A MPPT controller for 12/24V systems with a 100 V PV input, 98.0% peak and 99.0% tracking efficiency. It cools passively with a heat sink and no fan, has an LCD with LED indicators, an RJ45 port and lithium reactivation, with Bluetooth through the BT-2 module. It has a 3-year warranty and suits mid-sized RV and van systems wanting quiet operation and app monitoring. | – | – | Yes | – | – | – | 9.37 | 238 | 6.81 | 173 | 2.85 | 72 | – | – | – | – | – | Bluetooth (BT-2 module) | – | Yes | – | LCD with LED indicators | MPPT | 40 | 12/24V | – | 100 | – | – | – | 98.0 | 99.0 | – | – | – | – | Yes | – | – | Lead-acid: bulk, absorption, float, equalization; lithium: bulk, absorption | – | – | RJ45 | – | Passive (heat sink, no fan) | Negative ground | – | – | Yes | 3 years | – | – | – | – | – | – | – | 2020 | 6 | ||
$32.99 | Mixed | Renogy | Wanderer Li 30A PWM (RNG-CTRL-WND30-LI) | A small 30 A PWM controller for 12V systems with LED indicators, a 4-stage charge profile, a LiFePO4 setting and an RS232 port. It accepts only 25 V of PV input, so it is limited to 12V-class panels, and at 0.65 lbs it is one of the lighter units. A low-cost option for simple RV or van setups that don't need MPPT. | – | Yes | – | 0.65 | 0.29 | 6.45 | 164 | 4.31 | 109 | 1.76 | 45 | IP20 | – | – | 113 | 45 | – | – | – | – | LED indicators | PWM | 30 | 12V | – | 25 | – | – | – | – | – | – | AGM, Gel, Flooded, Lithium | Yes | – | – | – | – | Bulk, boost, float, equalization (4-stage PWM) | – | – | RS232 | – | – | Negative ground | 8 | 10 | Yes | – | FCC, CE, RoHS | Yes | – | – | – | Yes | Yes | – | – | |||
– | Mostly positive | Victron Energy | BlueSolar MPPT 75/15 | A small 15 A MPPT controller for 12/24V systems with a 75 V PV input, 98.0% peak efficiency and a VE.Direct port. Its IP65 rating is the highest in the table, and 10 mA self-consumption is lower than most. Bluetooth needs a separate dongle, unlike Victron's SmartSolar versions, and it handles up to 400 W at 24V. Suits compact, exposed installs. | – | – | Yes | – | 1.10 | 0.50 | 4.45 | 113 | 3.94 | 100 | 1.57 | 40 | IP65 | -22 | -30 | 140 | 60 | – | – | Yes | Yes | – | MPPT | 15 | 12/24V | Yes | 75 | 200 | 400 | – | 98.0 | – | 10.0 | – | – | – | – | – | – | – | 15 | – | VE.Direct | – | – | – | 10 | 6 | Yes | – | – | – | – | – | – | – | – | – | – | ||
$96.31 | Mixed | Victron Energy | SmartSolar MPPT 100/20 48V | Victron's 20 A SmartSolar model adds 48V support to the usual 12/24V, with automatic detection, built-in Bluetooth, a VE.Direct port and a 100 V PV input. It handles 290 W at 12V, 580 W at 24V or 1160 W at 48V, and has an IP43 rating with a -30 to 60 ℃ operating range. It is one of the few low-current controllers that also works with 48V banks, suiting app-monitored van and cabin systems. | Yes | – | 1.43 | 0.65 | – | – | – | – | – | – | IP43 | -22 | -30 | 140 | 60 | Bluetooth | – | – | – | – | MPPT | 20 | 12/24/48V | Yes | 100 | 290 | 580 | 1,160 | 98.0 | – | – | – | – | Yes | – | – | – | – | 1 | – | VE.Direct | – | – | – | 10 | 6 | Yes | – | EN/IEC 62109-1, UL 1741, CSA C22.2 No. 107.1 | – | Yes | Yes | Yes | – | – | – | – | ||||
$149.99 | – | GUIGOOD | – | This 120 A MPPT supports battery systems from 12V to 96V, the widest range listed, and up to 230 V of PV input, handling 1440 W at 12V or 5760 W at 48V. It offers an LCD, user-adjustable charge settings and RS485 through an RJ12 port. At 8.7 lbs (3.9 kg) it is the heaviest controller with a stated weight, aimed at large off-grid systems more than van installs. | – | – | No | – | 8.69 | 3.94 | 12.40 | 315 | 3.60 | 91 | 8.40 | 213 | – | – | – | – | – | – | – | Yes | – | LCD | MPPT | 120 | 12/24/36/48/60/72/84/96V | Yes | 230 | 1,440 | 2,880 | 5,760 | – | – | – | LiFePO4, lithium-ion, lead-acid, GEL | – | Yes | – | – | – | – | – | – | RS485 (RJ12) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
$185.00 | – | AMPINVT | AP-80 | An 80 A MPPT controller that auto-detects 12, 24, 36 or 48V systems and accepts up to 150 V of PV input, handling as much as 4540 W on a 48V bank. It shows daily generation curves on an LCD and offers RS485 for an optional Wi-Fi module. Among the highest-current units listed, it fits large RV or off-grid arrays more than small van setups. | – | No | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | – | LCD | MPPT | 80 | 12/24/36/48V | Yes | 150 | 1,140 | 2,260 | 4,540 | 99.0 | 99.0 | – | Gel, SLA, AGM, flooded, lithium (LiFePO4) | – | Yes | – | – | – | Constant current (MPPT), equalizing, floating | – | – | RS485 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |||
$9.98 | – | Anern | US-SC30A | The lowest-priced controller listed, this 30 A PWM unit handles 12/24V systems with an LCD, adjustable cut-off voltages, timer and load modes, and two 5V/2A USB ports. It uses 3-stage charging and supports only open, AGM and gel lead-acid batteries, not lithium, fitting simple setups where cost matters more than efficiency. Its listed 1.2 in. (30 mm) length looks like the unit's depth. | – | – | No | 2 | – | – | 1.18 | 30 | 2.76 | 70 | 5.24 | 133 | – | – | – | – | – | – | – | – | Yes | LCD | PWM | 30 | 12/24V | – | – | – | – | – | – | – | – | Open, AGM, GEL lead-acid | No | – | – | – | – | Direct, boost, float (3-stage) | – | – | – | – | – | – | – | – | Yes | – | – | – | – | – | – | – | – | – | – | ||
$81.69 | – | EARNMee | – | A 60 A MPPT controller with 150 V PV input and manual selection of 12, 24, 36 or 48V output, one of the few here without auto voltage detection. It uses temperature-controlled fan cooling, an LCD display and protections for overload, voltage and short circuit. Its IP21 rating is the lowest listed and the warranty is 12 months, but it is a budget route to 60 A for large RV arrays. | – | – | No | – | 3.50 | 1.59 | 8.27 | 210 | 3.54 | 90 | 6.50 | 165 | IP21 | – | – | – | – | – | – | Yes | Yes | LCD | MPPT | 60 | 12/24/36/48V | No | 150 | – | – | – | 98.0 | – | – | Lead-acid, Gel, Lithium | – | – | – | – | – | – | – | – | – | – | Fan (temperature-controlled air cooling) | – | – | – | – | 12 Months | – | – | – | – | – | – | – | – | – | ||
$36.99 | – | ELUSH | 100A | A low-cost controller rated at 100 A for 12 to 48V batteries with 100 V PV input, two USB ports and a backlit LCD showing charge and load data. It supports sealed, gel, flooded and LiFePO4 batteries and works from -13 ℉ to 131 ℉ (-25 to 55 ℃), with the maker describing a mix of MPPT and PWM methods. A 100 A rating at 1.8 lbs (810 g) is unlikely, since true 100 A MPPT units listed weigh over 6.6 lbs (3 kg). | – | – | No | 2 | 1.79 | 0.81 | – | – | – | – | – | – | – | -13 | -25 | 131 | 55 | – | – | Yes | Yes | – | – | 100 | – | Yes | 100 | – | – | – | – | 99.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$42.99 | – | ELUSH | SA10048 | Upgraded version of a budget 12 to 48V controller rated at 100 A with 100 V PV input, adding precise timer control and a live solar panel voltage readout to its backlit LCD. It has two USB ports, several load modes and a -13 ℉ to 131 ℉ (-25 to 55 ℃) operating range, and the maker describes it as a hybrid MPPT/PWM design. A 100 A rating at 2.1 lbs (950 g) is unlikely, since true 100 A MPPT units listed weigh over 6.6 lbs (3 kg). | – | – | No | 2 | 2.09 | 0.95 | 7.60 | 193 | 7.30 | 185 | 2.60 | 66 | – | -13 | -25 | 131 | 55 | – | – | Yes | Yes | – | – | 100 | – | Yes | 100 | – | – | – | – | 99.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$8.79 | – | EtnalSolar | – | Compact 10 A PWM controller for 12/24V systems handling 120 W or 240 W of panels, with a backlit LCD, adjustable timer and two 5V/2A USB ports. Unlike some budget PWM units it supports Li-ion and LiFePO4 (set manually) as well as lead-acid, and keeps settings through power loss. Tied for the lowest current listed, it suits single small panels on trailers, boats or battery maintainers. | – | – | No | 2 | 0.31 | 0.14 | 5.31 | 135 | 2.76 | 70 | 1.18 | 30 | – | – | – | – | – | – | – | Yes | – | Backlit LCD | PWM | 10 | 12/24V | Yes | – | 120 | 240 | – | – | – | – | Open, AGM, GEL lead-acid; Li-ion; LiFePO4 | Yes | – | – | – | – | Bulk, absorption, float | – | Adjustable timer | – | – | – | – | – | – | Yes | – | – | – | – | – | – | – | – | – | – | ||
$18.99 | – | HilapriSol | 20APWMSAE01 | Small 20 A PWM controller for 12V systems up to 300 W, with an LCD, LED indicators, 4-stage charging and an extra SAE cable for portable panels. A blocking diode prevents reverse current at night, and it carries FCC, CE and UKCA marks. At 5 oz (140 g) it is among the lightest listed, a fit for simple portable panel setups rather than larger roof arrays. | – | – | No | – | 0.31 | 0.14 | 7.08 | 180 | 4.13 | 105 | 1.18 | 30 | – | – | – | – | – | – | – | Yes | – | LCD with LED indicators | PWM | 20 | 12V | – | – | 300 | – | – | – | – | – | – | – | – | – | – | – | 4-stage | – | – | – | – | – | – | – | – | Yes | – | FCC-SDOC, CE, UKCA | Yes | – | – | – | – | – | – | – | ||
$27.99 | – | OOYCYOO | MPPT 100A | Note: This has "MPPT" in the title and listing, but that may not be accurate based on the price point and weight; please verify before purchase. Low-cost 12/24V controller listed at 100 A, with an LCD, two USB ports, manual load switching and 99.0% tracking efficiency. Its 13 mA self-consumption is among the lowest listed, and the warranty is 360 days, suiting buyers wanting a basic budget controller for a small 12V setup. A 100 A rating at 10 oz (280 g) is unlikely, since other 100 A MPPT units listed weigh over 6.6 lbs (3 kg). | – | – | No | 2 | 0.62 | 0.28 | 6.69 | 170 | 3.74 | 95 | 1.57 | 40 | – | 14 | -10 | 140 | 60 | – | – | – | Yes | – | – | 100 | – | – | – | – | – | – | – | 99.0 | 13.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 360 days | – | – | – | – | – | – | – | – | – | ||
$160.99 | – | POWLAND | PL-SY-GY120A-P-5-US | A 120 A MPPT controller that auto-detects battery systems from 12V to 96V, tied for the widest range listed, with up to 230 V of PV input and 98.0% peak efficiency. It uses 3-stage charging for LiFePO4, AGM, gel and flooded batteries and shows PV and charging data on an LCD. Among the highest-current units, it suits large off-grid or high-voltage arrays. | – | – | No | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | LCD | MPPT | 120 | 12/24/36/48/60/72/84/96V | Yes | 230 | – | – | – | 98.0 | – | – | LiFePO4, AGM, GEL, flooded lead-acid | – | – | – | – | – | Bulk, Absorption, Float | – | – | – | – | – | – | – | – | Yes | – | – | – | – | – | – | – | – | – | – | ||
$79.99 | – | PowMr | HHJ60-PRO | A 60 A MPPT controller with automatic 12/24/36/48V detection, 98.0% peak and 99.9% tracking efficiency, a backlit LCD and forced-air fan cooling. It supports parallel operation and includes a battery temperature sensor, which few listed units do, and accepts many chemistries including LiFePO4, NiCd and user-defined settings. Among the lower-priced 60 A units, it suits larger builds on a budget. | – | – | No | – | – | – | 8.46 | 215 | 5.12 | 130 | 3.35 | 85 | – | – | – | – | – | – | – | Yes | – | Backlit LCD | MPPT | 60 | 12/24/36/48V | Yes | – | – | – | – | 98.0 | 99.9 | – | Vented, Flooded, Sealed, Gel, NiCd, Lithium, LiFePO4, user-defined | – | Yes | – | – | Yes | – | – | – | – | Yes | Fan (forced air) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
– | – | Qigreesol | SA | Listed at 150 A, the highest rating in the category, this controller auto-detects 12 to 48V systems and has a backlit LCD, timer modes and two USB ports. The maker describes it as a hybrid MPPT/PWM design where PV voltage follows battery voltage during bulk charging, suiting budget experiments rather than a primary van system. A 150 A rating at 7 oz (190 g) is unlikely, since 100–120 A MPPT units listed weigh 6.6–8.7 lbs (3–4 kg). | – | – | No | 2 | 0.42 | 0.19 | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | – | Backlit LCD | Hybrid MPPT/PWM | 150 | 12/24/36/48V | Yes | – | – | – | – | – | 99.5 | – | Lead-Acid, Lithium | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
$7.99 | – | Rolokit | WG-YE17-B8B6 | A very low-cost 30 A PWM controller for 12/24V systems with an LCD, adjustable voltage settings and two 5V/3A USB ports. It supports only open, AGM and gel lead-acid batteries, with no lithium profile, unlike most controllers here. At 5 oz (140 g) it suits basic lead-acid setups on sheds or small trailers more than lithium-based van builds. | – | – | No | 2 | 0.31 | 0.14 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | LCD | PWM | 30 | 12/24V | Yes | – | – | – | – | – | – | – | Open, AGM, GEL lead-acid | No | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$37.99 | – | SOGTICPS | SY10048 | Budget controller sold as 100 A for 12 to 48V systems with 100 V PV input, two USB ports, and a backlit LCD with clock and several load-control modes. The maker notes that it combines MPPT and PWM charging rather than offering full MPPT, so it fits small, cost-focused setups more than large arrays. A 100 A rating at 1.9 lbs (840 g) is unlikely, since true 100 A MPPT units listed weigh over 6.6 lbs (3 kg). | – | – | No | 2 | 1.85 | 0.84 | 7.67 | 195 | 2.59 | 66 | 7.24 | 184 | – | – | – | – | – | – | – | Yes | Yes | – | – | 100 | – | Yes | 100 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$45.99 | – | vuicci | controller-A-01 | Boost MPPT controller that steps 12–60 V panel input up to charge 48V, 60V or 72V batteries, a design no other controller listed offers. It supports LiFePO4, NMC, lead-acid, AGM and gel, with up to 1200 W of panels, a color LCD, metal housing and fan cooling, fitting golf carts and high-voltage banks rather than typical 12V van systems. The title gives 30 A, while the features describe 30 A of PV input and 15 A of battery charging current. | – | – | No | – | 1.80 | 0.82 | 6.70 | 170 | 2.36 | 60 | 3.70 | 94 | – | – | – | – | – | – | Metal | Yes | Yes | Color LCD | MPPT | – | 48/60/72V | – | – | – | – | – | 98.0 | 99.0 | – | LiFePO4, NMC, Lead-Acid, AGM, Gel | – | – | – | – | – | – | – | – | – | – | Fan | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$19.99 | – | Depvko | 30A MPPT | Budget 30 A controller sold as MPPT for 12/24V systems, with an LCD for live data and settings, two 5V/2.5A USB ports and memory that keeps settings if the battery runs flat. It protects against overcharge, short circuit, reverse polarity and low voltage. Among the lowest-priced MPPT controllers listed, it fits small, low-cost setups rather than systems where efficiency matters. | – | – | No | 2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | LCD | – | 30 | 12/24V | Yes | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
$22.09 | – | Depvko | 100A MPPT | Budget 12/24V controller sold as a 100 A MPPT unit, with automatic system voltage detection, an LCD for live readings and settings, and 99.0% tracking efficiency claimed. It protects against overcharging, short circuits and reverse polarity, and comes with a 1-year warranty. A true 100 A MPPT rating is unusual at this price, since the other 100 A MPPT units listed cost several times more and weigh over 6.6 lbs (3 kg). | – | – | No | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | LCD | MPPT | 100 | 12/24V | Yes | – | – | – | – | – | 99.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Yes | 1 Year | – | – | – | – | – | – | – | – | – | ||
All products are hidden. Change or clear your filters to see products in this category. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
47 products
Prices from Amazon as of . Product prices and availability are accurate as of the date and time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of the product. As an Amazon Associate I earn from qualifying purchases.
What the columns mean
- Reviews
- What owners say about the product in forums, reviews and videos, with sentiment summarized by AI. We try to exclude reviews that are obviously sponsored or biased. Each product's page has the details and sources. No reviews from Amazon are used due to Amazon rules; see our About page for more information on how we gather and use opinions and reviews from other sites.
- Description
- A short description of the product and how it compares to others in its category.
- Manufacturer page
- A link to the manufacturer's product page.
- User manual
- A link to the official user manual for this product, or a page on which the user manual can be found. Usually a PDF file.
- Popular brand
- Products with this designation are popular and well-known in their category.
Outlets
- USB-A ports count
- The number of USB-A ports available. Useful for charging phones and other devices, though usually more slowly than with USB-C ports.
Physical Attributes
- Weight (lbs)
- Item weight in pounds. May be rounded from actual weight.
- Weight (kg)
- Item weight in kilograms. May be rounded from actual weight.
- Length (in.)
- Item length in inches. When comparing products, note that measurements may not be consistently assigned. For example, "length" might just be whichever dimension is largest, regardless of the item's orientation when you use it. A different product might refer to length as a different side. Refer to product manuals and images if you are uncertain.
- Length (mm)
- Item length in millimeters. When comparing products, note that measurements may not be consistently assigned. For example, "length" might just be whichever dimension is largest, regardless of the item's orientation when you use it. A different product might refer to length as a different side. Refer to product manuals and images if you are uncertain.
- IP rating
- Ingress Protection rating under IEC 60529, such as IP67 (dust-tight, survives immersion). Many listings say 'waterproof' without an IP code, which can't be verified.
Operating Temp Range
- Operating temp min (℉)
- Lowest air temperature at which the product is rated to work.
- Operating temp min (℃)
- Lowest air temperature at which the product is rated to work.
- Operating temp max (℉)
- Highest air temperature at which the product is rated to work, relevant in a parked vehicle in summer.
- Operating temp max (℃)
- Highest air temperature at which the product is rated to work.
Internals
- App connectivity
- How the product connects to the maker's phone app, most commonly Bluetooth and/or Wi-Fi. Bluetooth usually works with little to no setup. Wi-Fi lets you monitor or control the product remotely (if both the product and your phone are connected to the internet) and sometimes do things like install firmware updates. Other technologies might be used for app connectivity. Sometimes product specs just mention an app but don't say how it connects, so "Yes" might be all we know here; check with the manufacturer if it's important for your uses.
Physical Attributes
- Housing material
- Shell material, usually plastic or metal. Metal is tougher for truck beds and overlanding but heavier.
Safety
- Overheat protection
- Whether the controller reduces or stops charging when it gets too hot.
- Low-voltage protection
- Whether the controller switches off its load output before the battery is drained too far (low-voltage disconnect).
Physical Attributes
- Display type
- Kind of screen, such as color LCD, backlit LCD or LED indicators, which affects readability in sunlight and at night.
Core specs
- Controller type
- Whether the controller uses MPPT (maximum power point tracking) or PWM charging. MPPT harvests more power from higher-voltage panels and in cold weather; PWM is cheaper and fine for small systems where panel and battery voltages match.
- Rated charge current (A)
- The maximum current the controller can deliver to the battery. It sets how large a solar array the controller can handle at a given battery voltage.
- Battery system voltages
- The battery bank voltages the controller supports, such as 12/24V or 12/24/36/48V. Your battery bank must match one of them.
- Auto voltage detection
- Whether the controller detects the battery bank voltage automatically instead of needing it set by hand.
Charging
- Max PV input voltage (Voc) (V)
- The highest solar panel open-circuit voltage the controller can accept. It limits how many panels you can wire in series; exceeding it, especially in cold weather, can damage the controller.
- Max solar input (12V battery) (W)
- The largest solar array, in watts, the controller can use when charging a 12V battery bank.
- Max solar input (24V battery) (W)
- The largest solar array, in watts, the controller can use when charging a 24V battery bank.
- Max solar input (48V battery) (W)
- The largest solar array, in watts, the controller can use when charging a 48V battery bank. Empty when the controller doesn't support 48V.
- Peak conversion efficiency (%)
- The share of solar power the controller passes to the battery at its best operating point. Higher means less energy lost as heat.
- MPPT tracking efficiency (%)
- How closely an MPPT controller follows the panel's maximum power point. It is separate from conversion efficiency; PWM controllers have no tracking.
Power
- Self-consumption (mA)
- The current the controller itself draws from the battery when idle. Lower values matter in small systems and during long cloudy spells.
Charging
- Battery types supported
- The battery chemistries the controller has charging profiles for, such as AGM, Gel, Flooded, LiFePO4 or user-defined.
- LiFePO4 charging profile
- Whether the controller has a built-in LiFePO4 (lithium iron phosphate) charging preset, rather than needing voltages set by hand.
- User-defined charge voltages
- Whether you can set your own bulk, absorption and float voltages to match a battery the presets don't cover.
- Lithium reactivation
- Whether the controller can wake a lithium battery whose built-in BMS has shut it off after over-discharge.
Safety
- Low-temp charge cut-off
- Whether the controller stops charging below freezing to protect lithium batteries, which are damaged by charging under 32℉ (0℃).
Charging
- Battery temp sensor included
- Whether a remote battery temperature sensor comes in the box, so charge voltage is adjusted for battery temperature (temperature compensation).
- Charging stages
- The charging stages the controller runs, such as bulk, absorption, float and equalization. Multi-stage charging extends battery life.
Outlets
- Load output current (A)
- The maximum current the controller's load terminals can supply to DC devices such as lights. Zero or empty when there are no load terminals.
Controls
- Load control modes
- The ways the load output can be switched, such as manual, dusk-to-dawn light control, light plus timer, or timer only. Useful for running lights automatically.
Internals
- Communication port
- The wired data port for monitors, adapters or system integration, such as RS485, RS232 or VE.Direct.
- Parallel operation
- Whether several controllers can be connected in parallel to charge one battery bank from a larger array.
Physical Attributes
- Cooling
- How the controller sheds heat: passive (heat sink) or a fan. Fans add noise and a part that can wear out.
Internals
- Grounding type
- Whether the controller switches on the negative or positive side, or shares a common negative. Common-negative controllers suit vehicles and RVs where the chassis is ground.
Physical Attributes
- Max terminal wire size (AWG)
- The thickest wire the terminals accept, in AWG (lower numbers are thicker). It tells you whether your cables will fit.
- Max terminal wire size (mm²) (mm²)
- The thickest wire the terminals accept, in square millimeters.
Safety
- Reverse polarity protection
- Whether the controller survives the panel or battery being connected backwards.
Warranty & Certification
- Warranty
- Manufacturer warranty information. Note that for some products, the warranty may only cover certain parts, or registration with the manufacturer may be required to activate or extend the warranty. Check warranty details before purchase.
- Certifications summary
- Certifications held by this device.
- CE marked
- Declares conformity with EU safety and electromagnetic compatibility (EMC) rules. Common on imported products; it is a self-declaration, not an independent test.
- UL 1741 listed
- Certified to UL 1741, the North American safety standard for inverters and charge controllers used in PV systems. Often required by inspectors for permanent installations.
- CSA C22.2 No. 107.1
- Certified to CSA C22.2 No. 107.1, the Canadian safety standard for power conversion equipment, the counterpart of UL 1741.
- IEC 62109-1 certified
- Certified to IEC/EN 62109-1, the international safety standard for power converters in PV systems.
- RoHS compliant
- Meets the EU RoHS directive restricting hazardous substances such as lead and mercury.
- FCC Part 15 compliant
- Meets FCC Part 15 limits on radio interference, so the electronics won't disrupt radios, Wi-Fi or other devices nearby. It's required for sale in the US.
- Year released
- The year this model first went on sale. Newer models may have the latest technology; established ones have been sold for years.
- Years on market
- How many years ago this model first went on sale (0 is this year).
All 47 solar charge controllers on this page, A to Z
- 120A MPPT Solar Charge Controlle 12V/24V/36V/48V/60V/72V/84V/96V Auto,Up to11520W Max Input 230V, RS485, LCD Smart Cooling Solar Panel Charge Controller for Off-Grid Systems AGM, Gel, Lithium ect
- AMPINVT AP-80
- Anern US-SC30A
- BougeRV ISE136
- BougeRV ISE218
- Depvko 30A MPPT
- Depvko 100A MPPT
- EARNMee 60A MPPT solar charge controller,12V 24V 36V 48V(Manual)PV 150V | Ideal for RV, Large Solar Systems, Compatible with Mono/Poly Panels & Lead-Acid/Lithium Batteries,98% Conversion Efficiency
- ECO-WORTHY L03PWM30A2.1BW-1
- ELUSH 100A
- ELUSH SA10048
- EPEVER Tracer4210AN G3
- EPEVER Tracer 6415AN
- EtnalSolar 10A PWM Solar Charge Controller with Auto Parameter LCD Display | 12V/24V Solar Panel Regulator with Dual USB Port Adjustable Timer Setting for Lead-Acid & Lithium Batteries Garden Light Shed
- Genasun GV-10-Li-14.2V
- HilapriSol 20APWMSAE01
- ipandee ESF48H100
- ipandee IPD-ESF48H60
- Litime 30A 12V/24V MPPT Smart
- Litime L48V60A-MPPT-BT-E
- Morningstar Corporation SS-MPPT-15L
- OOYCYOO MPPT 100A
- POWLAND PL-SY-GY120A-P-5-US
- PowMr HHJ60-PRO
- PowMr POW-M80-PRO
- Qigreesol SA
- Renogy RCC-M10020-C2
- Renogy RNG-CTRL-RVR20
- Renogy RNG-CTRL-RVR40
- Renogy RNG-CTRL-RVR40-BT
- Renogy Rover Li 30A (RNG-CTRL-RVR30)
- Renogy Rover Lite 60A (RCC60RVRE)
- Renogy Wanderer Li 30A PWM (RNG-CTRL-WND30-LI)
- Rolokit WG-YE17-B8B6
- SOGTICPS SY10048
- Victron Energy BlueSolar MPPT 75/15
- Victron Energy SCC115045212
- Victron Energy SCC115060211
- Victron Energy SCC115070211
- Victron Energy SCC125110411
- Victron Energy SmartSolar MPPT 75/10
- Victron Energy SmartSolar MPPT 75/15
- Victron Energy SmartSolar MPPT 100/20 48V
- Victron Energy SmartSolar MPPT 100/30
- Victron Energy SmartSolar MPPT 100/50
- Victron Energy SmartSolar MPPT 150/35
- vuicci controller-A-01